How to Install a Yofer Front Lip on a Honda Civic 11th Gen

The Yofer front lip transforms your 11th generation Honda Civic into a more aggressive, sporty appearance in under an hour. Check out how to install Yofer front lip in this great video.

Installing a Yofer front lip on a BRAND NEW 2024 Honda Civic

Yofer Front Lip Installation Steps

1. Raise your Civic on jack stands for better access.

2. Remove the pins from the two tabs under the center of your bumper.

3. Position the center section against the bumper, aligning the tabs, and reinsert the pins.

4. Clean the side piece contact areas with rubbing alcohol.

5. Apply double-sided tape to the side pieces and press firmly against the bumper.

6. Connect the center and side pieces using tabs and silver screws.

7. Secure the center section to the bumper with the larger black screws.

8. Install the color-matched center cover using smaller silver screws.

9. Secure the extended sides to the bumper at the mounting points.

10. Lower your car and check alignment from all angles.

Materials and Tools

• Yofer front lip kit (center pieces, side pieces, mounting hardware)

• Jack stands

• Flathead screwdriver

• Drill with appropriate bit

• Rubbing alcohol

• Clean cloth

Tips and Recommendations

• Installation takes approximately one hour with basic tools.

• The lip lowers the front profile by 1-2 inches, reducing ground clearance.

• Consider adding matching side skirts to balance the lowered front profile.

• For detailed visual guidance, watch the installation video tutorial.

Yofer Body Kit for Honda Civic

Check out full Full Body Kit and extra parts on product page.